Choosing between a full broadcast and a partial broadcast changes more than the finished look of a concrete coating job. It changes how much flake you need to order, which receiver coat color to specify, and which clear topcoat has to be on the truck before broadcast day. Pro City Supply is a Tampa-based material supplier serving coating professionals throughout Tampa Bay, carrying decorative flakes, flake blends, and multiple flake sizes alongside epoxy, polyaspartic, and urethane coatings and topcoats in clear and pigmented systems. This guide walks through how to compare the two broadcast styles and build an accurate material order before you buy.
Table of Contents
ToggleFull Broadcast vs. Partial Broadcast

Full broadcast covers the coated surface completely with decorative flakes, so the finished floor reads as a solid flake pattern. Partial broadcast leaves the colored base coat visible between the chips, giving a speckled or accent look instead. Neither style is automatically the right choice for a job. The decision comes down to the appearance the customer approved and the requirements of the coating system you are installing, since flake rate, receiver coat color, and topcoat selection all have to line up with that system (SIMIRON Decorative Chip Product Data Sheet).
Estimating Flake Quantities by Broadcast Density
Flake size and broadcast density both drive how many pounds you need to cover a given area. TORGINOL’s Polymer Flake technical data gives these approximate rates as a starting point for estimating:
| Flake Size | Broadcast Density | Approximate Coverage |
|---|---|---|
| 1/4 inch and 1/8 inch | Full coverage | 5 to 7 sq ft per pound |
| 1/4 inch and 1/8 inch | Heavy coverage | 25 to 50 sq ft per pound |
| 1/4 inch and 1/8 inch | Light coverage | 50 to 200 sq ft per pound |
| 1/16 inch, 1/32 inch, and hybrid profiles | Full coverage | 3 to 5 sq ft per pound |
These are manufacturer examples rather than guaranteed yields, since actual use shifts with technique, project specifications, and the appearance you are targeting (TORGINOL Polymer Flake Technical Data Sheet). To build an order, divide your measured coating area by the coverage rate for the flake size and density you chose, then round up to the actual package size rather than the shipping weight. TORGINOL distinguishes a 40 pound net content bag from a 44 pound gross carton weight, so confirm which figure the coverage rate is based on before you finalize quantities.
Matching Finish, Color, and Sun Exposure
Because background resin can still show through a random or single full broadcast, SIMIRON recommends tinting the receiver coat to a color already in the flake blend so the approved sample reflects both the chips and the base underneath them, not the chips alone. Flake color is also worth a second look on projects with direct sun exposure. TORGINOL rates each flake color individually for lightfastness and notes that exterior suitability also depends on the coating manufacturer’s UV and environmental specifications for the resin system itself, so both the flake and the resin should be checked for an outdoor application. Finish texture is a related decision, since some coating systems offer variable surface textures that change how slip-resistant the finished floor is, so it is worth confirming the texture options with your coating manufacturer when you are specifying a system for a given area.
Planning the Complete Material Order

A flake order is rarely the whole order. Full broadcast systems typically call for a clear topcoat over the chips, and manufacturer instructions for decorative vinyl chip systems commonly include removing loose chips, scraping, and cleaning before that topcoat goes down, so budget for topcoat and surface cleanup materials alongside the flakes themselves. Pro City Supply also carries the related materials coating contractors typically need to round out an order, including:
- Moisture-mitigation products and moisture vapor barriers
- Concrete patches and crack-repair materials
- Joint fillers and bonding primers
- Surface-preparation materials and tools
Reviewing preparation tools and installation supplies alongside your concrete coating supplies and decorative flakes order helps make sure nothing gets left off the truck.
Checking Environmental Conditions Before You Order
Jobsite conditions affect both application and curing, and the specifics depend on the product you choose. As one example, a Sika Sikafloor-510 LPL system requires the substrate to stay at least 5 degrees Fahrenheit above the dew point and keeps ambient humidity at or below 85 percent during application and curing (Sika Sikafloor-510 LPL Product Data Sheet). Treat that as a reminder to check your actual jobsite conditions against the data sheet for whichever product you are using, rather than assuming a Tampa Bay location automatically meets any coating’s requirements. Temperature and humidity also affect your broadcast window. SIMIRON notes that higher temperatures shorten epoxy working time, higher humidity shortens working time with polyaspartic resin, and a receiver coat that cures too fast can prevent the flakes from embedding properly. Build that working time into your crew scheduling before the receiver coat goes down, not after.
Get Help Specifying Your Next Broadcast Order

Whether you are planning a full broadcast or a partial broadcast for a Tampa Bay coating project, Pro City Supply can help you match flake size, receiver coat color, and compatible topcoats to the system you are installing. Call (813) 884-6900 to talk through your material order, or stop by the Tampa showroom to see flake and coating options in person. Pro City Supply serves coating contractors throughout Tampa Bay and Central Florida.



